|
 |
|
|
 |
| |
|
|
|
|
 |
 |
|
|
|
|
Anchorage clay by synthetic resin, filler materials and chemical composition of the chemical additives anchoring materials is of superior tensile, compressive, anti-shock, water-ze, anti-aging, corrosion resistance, resistance welding. And the construction cost is very low at the end of the application various steel or concrete anchor. In recent years especially in the framework of large-scale planting-bar was on the popularization of the application and it can also be used for Coal Wharf cast stone and tile adhesive fixed acid material.
|
 |
 Note:
1, when the clay or anchoring is found layered sediments, mix it before using, otherwise it will have bad effects.
2, the ingredients should be of appropriate amount, or there will be a waste of materials (the materials are not bonding after more than initial setting time)
3, after the use of clay anchor, do not loosen the components before curing, otherwise it will reduce the bonding force.
4, clay and curing agents should be preserved in the dark, 25 ℃ environment storage for a period of six months. It can still be used if stiffened. |
High-strength structural steel rods of plastic technical parameters |
Screw diameter (MM) |
Ф10 |
Ф12 |
Ф14 |
Ф16 |
Ф18 |
Ф20 |
Ф22 |
Ф25 |
Ф28 |
Ф30 |
Ф32 |
Hole diameter (MM) |
14 |
16 |
18 |
22 |
25 |
28 |
30 |
32 |
36 |
38 |
40 |
Anchorage depth (MM) |
120 |
150 |
180 |
210 |
240 |
270 |
300 |
370 |
420 |
450 |
540 |
Uplift Force (KN) |
20 |
31 |
45 |
55 |
70 |
91 |
109 |
138 |
162 |
188 |
284 |
The reinforcing bar is a second class thread steel , yield strength FYK = 335Mpa, design strength FY = 310Mpa, concrete strength C30 = 30N/mm square, the proposed depth 15 times Anchor bar diameter |
|
|
|
|
|
|
|
MM Bar diameter MM |
Ф6 |
Ф8 |
Ф10 |
Ф12 |
Ф14 |
Ф16 |
hole diameter MM |
10 |
12 |
14 |
16 |
18 |
20 |
Anchorage depth MM |
100 |
130 |
160 |
190 |
220 |
250 |
Uplift Force KN |
5.1 |
10.2 |
16.4 |
25.1 |
36.2 |
48 |
The reinforcing bar is a steel, accepting defeat the strength as FYK=235 Mpas;Design the strength as FY=210 Mpas; The concrete strength is the C 30=30 Ns/mm square, suggest the anchor man solid depth as 1500% reinforcing bar diameters |
|
|
|
 |
 |
|
|
|
|
|
