The resin anchor man solid from synthetic resin, solid turn, the accelerant is other to assist to anticipate to prepare but become according to the certain comparison of glue a dense form to glue to connect material. It has normal temperature solid piece, glue to connect strength high anchor man solid dint dependable and the durable wait good function and so on.Be applicable to a tunnel to protect, well tube the material press to pack, underground engineering and side ascent, abrupt wall of the anchor man spray to protect, building components with solid anchor man.

Application::

　Apply to roadway support, prepared by well bore equipment, and underground engineering slope, steep wall of bolting and shotcreting and supporting building components such as Anchor

Product characteristics ：
The operation is simple, anchor man the solid dint is big, patience good,
Function index sign : :
Compressive strength: ≥ 60 MPa
Shear strength: ≥ 35 MPa
bonding strength : deformed steel bars > 16 MPa of concrete> 7 MPa
Capacity:1.9- 2.2 g /cm2
Modulus of elasticity: ≥ 1.6 X104MPa
Park Sang than: ≥ 0.3
Vibration fatigue:> 8000000times,
Storage period: < 25 ℃ ; nine months
Application environment: -30 ℃ - 60 ℃

Notes:
It must be cleared thoroughly before installation of rotating anchor-hole implantation. In order to fully bond, do not touch the product storage during the awaiting curing time.
It should be preserved in dark and cool place of 5 -25 ℃ .The first glue can not be used.

According to the design of a borehole diameter, depth and anchor steel anchor choose suitable anchorage;
2 drill a hole in the calibration of the Anchorage-based;
3 remove the dust in the drill hole, fill with proper anchoring agent;
4 use a mixer to promote a steel-driven anchor which can promote the hole at the end of mixing, stirring for 30 +5 seconds;
5 Wait 15 minutes before the carrage